The Electro-Luber
MD 2000 is a self-contained, microprocessor controlled, motor driven automatic
lubricator. The MD 2000 unit is not a pressure vessel. The MD 2000 does not
operate by producing gas, instead, operation of the lubricator depends upon
the use of minor internal pressure forcing lubricant into the threads of a
unique rotating auger pump. This mixes and dispenses the lubricant at pressures
up to 200psi. This pressure allows the MD 2000 to be used with long feed line
pipework, and it can even cycle progressive distributors, allowing one MD
2000 to feed several bearings. When one or a combination of selector switches
are turned on, the unit will activate at selected intervals (see charts on
pages 3&4). At each interval, approximately 1.25cc of grease will be delivered
to the bearing. The grease output is not affected by temperature or altitude.
When the unit is empty, refilling is accomplished using a standard grease
gun.
